adamant on Not happy with the field of view / current cameras
My cameras are mounted on the building that view a driveway on the side of our building. I need to get a more depth field of view. I’ll see if I can post a picture of the side of the building to give...
View ArticleMatthew Ernst on Not happy with the field of view / current cameras
Hello , before I can assist you with this question I need to clarify a few things. I noticed the camera model in the image is a TVI technology camera and the recorder is an NVR with built in POE. This...
View ArticleNight Hawk on techproddns is down
Hey Guys, it looks like your ddns server has gone down tonight. We have lost connection to all units that we have networked through techproddns.com
View ArticleRancherralph on techproddns is down
I am having the same issue. DVR is not showing up on the iPhone app and the techproddns website is unavailable.
View ArticleJose Malave on techproddns is down
The Server was conducting a routinary update. It was back and running 20 minutes after the shutdown occurred.
View ArticleMarty on Backup not working on web app
I'm using Sibell NVMS Web to remotely monitor my setup. When I create a backup, it says 100% complete, but the file is not in the directory I selected. At one point, I could press the play button to...
View ArticleJose Malave on Backup not working on web app
Marty, Please run your browser in admin mode as well as ensure that your user has permission to write to the directory you have chosen.
View ArticleLittleBrad on Enabling Pop Up Motion on Elite Series Recorders
Hello, The following video is going to go over how to set up a pop-up motion on Elite Series recorders at the local interface. This function is used if you want a certain camera to pop up on your...
View ArticleLittleBrad on How to modify Sibell IP camera address on Sibell NVR
Hello, The following video will go over how to change the IP address of Sibell cameras on a Sibell NVR from the local interface. Video: Thank you
View Articlejslaymon on Video Loss
The wife bought this system online about a year ago. She doesn't remember the seller and the box doesn't list anything so I can't contact the seller for help. Anyway, I finally got the time to install...
View ArticleHeath Phillips on Video Loss
If this is a coax system and none of the cameras are coming up I would advise you to check the power. Test voltage on the line at the camera side and verify you're getting the necessary voltage....
View Articlejslaymon on Video Loss
Not coax. The cameras come with connectors that connect to the cable supplied with the system. This cable has terminated connectors similar your typical R/W/Y video plug on one end and BNC connector...
View ArticleHeath Phillips on Video Loss
Same thing applies, are you sure you have sufficient power? Can you send me an image of the connectors from the camera and the cable?
View Articlejslaymon on Video Loss
Brand new unit so I hope the power supply is good. Unit powers up with no problem and is able to send a signal to the monitor. I'll take a pic of the connections tonight when I get home.......Thanks
View Articlejslaymon on Video Loss
Here's pics of the connections. One pic show two sets of cameras cables. Each camera has a yellow BNC and a red connector. The next pic shows the other end of the cable. Only the BNC connection is...
View ArticleHeath Phillips on Video Loss
Yea this is the type of system I meant by coax. These should be very easy to troubleshoot. Could still be the power supply, could be the cable (less likely since all cams don't work) or could be the...
View Articlejslaymon on Video Loss
I don't think it's the cameras either. I removed all of them and tried each one on each port with the same results. I also swapped the power supply and had the same results, which is why I don't think...
View ArticleJose Malave on Video Loss
jslaymon, In this image, the red 2.5mm DC barrels are not connected to a power source. You also show a connection here, any splice will degrade the signal and if this is a digital signal such as...
View Article