secure1 on WEBserver Default Password
What is the default password for the webserver software? Not the "fancy" DX software, but the simple, webservice-based tool?
View Articletubac on Need bullet 2mp replacement for my non working IPOB-EL2MPIR50
So any Elite ip camera will work with my NVR without resorting to ONVIF for networking reasons?
View ArticleRyan on Need bullet 2mp replacement for my non working IPOB-EL2MPIR50
tubac, Yes, if you have an Elite recorder, any Elite IP camera will work without ONVIF. If you stick series to series, they will use their own private protocols as they come from the same factory.
View ArticleClik here to view.
LittleBrad on How to change night/day mode sensitivity using SIBELL IP CAMERAs
Hello, The following will be what you will need to change in the web interface to adjust your day/night settings in your Sibell camera. You can also change them to a schedule to turn on/off at certain...
View ArticleRandyDuly on Possible power problem effecting video
I thought I better give everybody who have replied to this thread an update. This project and other projects at this client site kept us pretty busy at times and then at times things were on hold due...
View ArticleClik here to view.
This Old Prepper on MY PTZ Cam Problem
I have a 1080p Techpro TVI 2mp Mini IR 18X indoor/outdoor PTZ [#TVIPTZ-TP2IR18XME] that was ordered on May 31st and is now giving me a problem. It is attached to a 16 Channel Sibell Recorder 1U - CVI /...
View ArticleDunganHouse on Cannot get past the Wizard Log in screen on QDVR-SBE16
What about for flouting recorder boxes
View ArticleHeath Phillips on MY PTZ Cam Problem
Morning Dan, Have you tried power cycling the camera yet?
View ArticleLittleBrad on MY PTZ Cam Problem
Hello Dan, Please try Heaths suggestion of power cycling the camera. Also, are you using RS485 connections for your PTZ control or only the Coaxial? Check out the following video for the settings...
View ArticleThis Old Prepper on MY PTZ Cam Problem
Yes since I wrote the original post, I have rebooted the DVR and I have power cycled the camera with no changes. This morning the camera does not show up at all.....completely blank as if it was not...
View ArticleThis Old Prepper on MY PTZ Cam Problem
Update This camera went blank on my PC in my office however, it was still visible down stairs on the DVR monitor. I went thru the steps in your video and the setting match what you are showing. I...
View ArticleHeath Phillips on MY PTZ Cam Problem
Are you able to swap the channel inputs for your two PTZs at the back of the recorder, and tell me if the issue follows the channel input or the same camera?
View ArticleThis Old Prepper on MY PTZ Cam Problem
It stayed with the same camera and the other one worked on the other input Also, I cannot get it to even bring up the settings display but I can on the one that is working
View ArticleHeath Phillips on MY PTZ Cam Problem
Ok so we can say for certain it is not the DVR, it still could be an issue with cabling. Is it possible for you to basically swap these cameras and their location and look for the same results? Just...
View ArticleThis Old Prepper on MY PTZ Cam Problem
Well, both are mounted on the highest point of the hose and are on opposite ends...Let me see what I can do. The one giving me the issue is the easiest to get to
View ArticleGuest1 on DVR camera feed
Hello, I work for a company where we use DVR camera's and I am having trouble. I manage to get the IP address figured out and showing up on my browser but the video feed won't show up with it. Is...
View ArticleHeath Phillips on DVR camera feed
By chance are you using our equipment? I know with our equipment Internet Explorer is the only truly supported browser, others can work, but it is hit or miss. If you are in IE try adding the address...
View Article