English Rob on DVR-LT016480 Firmware upgrade
Been using this DVR for years with zero maintenance or issues. Was recently unplugged for 2 months, now it turns on and runs for 5 mins and keeps self restarting. In the logs it says Error 0x04 have no...
View ArticleJose Malave on DVR-LT016480 Firmware upgrade
Due to the age of the recorder it would be best to verify a few things: CPU Fan is functional ( if its not the CPU may already have damage due to overheating) Hard Disk Drive : If the drive is older...
View Articleasmikle1 on CCTV Camera cycles on and off at night only
Hello, I have three cameras (all Honic model HN-IA60E200FS) that work great in daytime but at night they constantly cycle on and off (see image). I use a 12V 5A power supply separate for each. The DVR...
View ArticleJose Malave on CCTV Camera cycles on and off at night only
Please attach the image to your post, please. Also, from what I am understanding the image goes white and then comes back, this is from the cameras, not the recorder itself, the sensor may be bad or...
View ArticleClik here to view.
Jose Malave on CCTV Camera cycles on and off at night only
The second image shows noise in the picture, have you check the connections and cables for both corrosions as well as damage to the insulation. Cables also should not be near any high voltage and when...
View ArticleJose Malave on Sibell RTSP URL
Please try IPC: rtsp://admin:123456@192.168.1.108:554/profile2 Were Profile 1 is main stream Profile 2 is substream 192.168.1.108 is the IP of the camera username is admin on this example password...
View ArticleDarryl on Adding second PTZ but cant get tilt to work
I have the " Elite 8 Channel DVR 1U 4K Pentabrid HD over Coaxial & IP" I already have the " Elite 25X 2MP HDCVI Infrared PTZ Security Camera [#CVIPTZ-EL2IRL25X-D2] " PTZ for a while and it works...
View ArticleJose Malave on Adding second PTZ but cant get tilt to work
The address refers to the Serial connection if you use this, since you are using COC these settings/parameters are not used. A troubleshooting step that you should look into is to move the camera from...
View ArticleRandyDuly on IP Wireless Camera Setup
I am wanting to setup a wireless IP camera in our lobby. I am wanting to connect it to a Windows Computer and be able to monitor camera on the PC. Also additional option would also to be able to...
View ArticleAldino Frassinelli on IP Wireless Camera Setup
Randy, Yes, our 4MP wireless IP can work for this application. Please do remember, however that a WiFi camera still needs power at the end of the day, so if where you intend on hanging your camera...
View ArticleEvilTessmacher on Suddenly No Signal...
Hi. I have a generic Chinese CCTV camera system with 4 "bullet" style cameras, and an "h.264 DVR" setup. Installed everything according to the rather poor single instruction sheet that came with it...
View ArticleJose Malave on Suddenly No Signal...
Is this a Coaxial system? If so check the power to the cameras as this could be the culprit.
View ArticleEvilTessmacher on Suddenly No Signal...
Jose Malave said Is this a Coaxial system? If so check the power to the cameras as this could be the culprit. I have no idea if it is a coaxial system or not. I don't know what that means. And I...
View ArticleJose Malave on Suddenly No Signal...
The connections on the back of the recorder if they are BNC connectors, then its coaxial, if its RJ45 Connectors then it is an IP system. Without having the model of the recorder there isn't much I can...
View ArticleRyan B on P2P Not working on Smart PSS V2.1
I have installed five 8 Ch Elite Seiries NVRs over the last month. I can view the Cameras remotely with the Phone APP, But when I try to use Smart PSS it says the device is off line. Any ideas on...
View ArticleJose Malave on P2P Not working on Smart PSS V2.1
Hello Ryan, What is the model of the recorder, the app you are using and what is the connection type is it P2P or IP/Domain. If you are a client of ours you can also create a ticket so we can test as...
View ArticleEvilTessmacher on Suddenly No Signal...
Jose Malave said The connections on the back of the recorder if they are BNC connectors, then its coaxial, if its RJ45 Connectors then it is an IP system. Without having the model of the recorder...
View Articlegmk1212 on How to add an RTSP camera to a Sibell Recorder?
With the Sibell NVR, how do you add a RTSP stream from a camera to the NVR as a camera fee? I have tried different way with the custom protocols and still have not had any luck. Not sure what to put in...
View ArticleJose Malave on Suddenly No Signal...
With a multimeter set to DC you will be able to test for power, as for the power supply that you have it depends on how much amperage your cameras will draw, you could match the same amperage that your...
View Article