West Coast Jones on Connecting cameras of differing power
Power and non-powered switch hook-up been working great for several months now to run my 12VDC & 24VDC IP cameras into port 1 on my DVR?NVR, allowing DVR port 2 for my LAN. Config Tool download...
View ArticleDan Maresca on "SIP-EMVD-21-4R recording problem"
HI Jones, We need to get the order this unit came off of. Can you private message me your order number for this unit? It would seem to be a processing issue with the DVR. Also is this the current...
View Articleanacommsystems on GDMSS lite above 16 cams
I just installed a 32 channel NVR and my customer install the app and was wanting to know how to view the cameras above the 16. where is the option or how do you view above 16 cams
View ArticleTed on GDMSS lite above 16 cams
Hi anacommsystems - If you are talking about the phone app - Connect by choosing all cameras in a 16 channel layout. Then 'swipe' left on the cameras to show the other 16. Swipe right to show the first...
View ArticleNullPointer on How to estimate disk space requirements?
I have a 8 Channel NVR with4 x 3MP IP Camera set to record on motion. Well, the area is high traffic, and I'm now getting about 2-3 days of recording off them before it fills up my 4TB drive. Which is...
View ArticleDan Maresca on How to estimate disk space requirements?
hello, you probably left the default value in the camera for bit rate. I would lower it to 4000. you can also lower frame rate to 25. http://www.securitycameraking......drive.html
View Articlemarco on Configuring new camera for ONVIF protocol.
I had a hard time accessing the camera when I first got it. Jose helped me get it going but my NVR (NVR-ELM-8-POE-8-DH) can't make any changes to the camera (IPVD-PR4IR28) so I connected it back to the...
View ArticleHeath Phillips on Configuring new camera for ONVIF protocol.
Good Morning, If the SADP tool is not finding it on your router, please try creating a small private network using a switch. Just hook the camera into the switch, get power to the camera (if this is...
View Articlemarco on Configuring new camera for ONVIF protocol.
Hello Heath. The camera and the PC are connected to the same switch which is connected to the router/modem. The switch assigns IPs. When Jose helped me last week, we used the SADP tool to change the...
View ArticleHeath Phillips on Configuring new camera for ONVIF protocol.
Hi There, After reading your response I feel like you and I spoke yesterday afternoon via chat and did some work on this... is that right or am I mistaken? If you still need the help, please let me...
View Articledwallstead on IPOB-EL1MPIR50-E Static IP not staying.
Hello! I had a mix of 1MP bullet and dome IP cameras, for a total of 8. I just added 2 more 1MP bullet IP cameras, model IPOB-EL1MPIR50-E for a total of 10. I logged in to the web interface of the...
View ArticleLittleBrad on IPOB-EL1MPIR50-E Static IP not staying.
Hello There, Do both cameras have the same firmware? If you would like you can start a live chat with us and we can remotely log into a computer that is on the same network. Direct Link:...
View Articledwallstead on IPOB-EL1MPIR50-E Static IP not staying.
LittleBrad - Both cameras are the same version, see below: Software Version 2.420.0000.12.R, build : 2015-12-22 WEB Version 3.2.1.315911 ONVIF Version 2.4.1 I may do the live chat, but most likely it...
View ArticleClik here to view.
Jose Malave on IPOB-EL1MPIR50-E Static IP not staying.
Hi, If you have a laptop on hand. Please connect this laptop to one of the PoE Ports in your NVR-ELE32C-16P4K. Use the config tool to set all of your cameras to DHCP, after doing so remove all of the...
View ArticleClik here to view.
dwallstead on IPOB-EL1MPIR50-E Static IP not staying.
Jose - Thank you for your solution and I will try this but nothing is explained in this answer, like mainly: Why do my other 8 cameras do just fine plugged in to the switch with static IPs? They have...
View ArticleJose Malave on IPOB-EL1MPIR50-E Static IP not staying.
Why is it that setting a static IP doesn't work with this switch? No switch or IP devices I have ever worked with behave this way. Static means static. If that isn't the case, then it should not even...
View Articletubac on Best Windows PC and operating system to setup ip cameras
Hi, i really need some help with this. I am a Mac user and unfamiliar with all things PC. I need to replace my old Windows Vista laptop with a new Windows PC to setup and troubleshoot ONVIF ip cameras...
View ArticleTed on Best Windows PC and operating system to setup ip cameras
Tubac - 1.So are all new Windows laptops capable of connecting to the Ethernet and wifi simultaneously? As long as they have Wireless adapter (Wifi) and and RJ-45 port. (LAN or Network connector) Or it...
View Articletubac on Best Windows PC and operating system to setup ip cameras
Thanks! So any recently manufactured Windows laptop running Windows 7 or 10 with wifi and an Ethernet port should be capable? Do you have to enable anything or should the wifi and Ethernet port work...
View ArticleNight Hawk on manual for a ACRS-DX09
Can I download a replacement manual for a ACRS-DX09 key pad? I think my dog ate it..
View Article