Dan Maresca on "netalarm"
Hello, I believe the alarm you are referring to is to let you know the NVR has lost connectivity. Which sub heading is that option under?
View ArticleClik here to view.
marcin on "netalarm"
Hi Thank you for you response, but I believe we are talking about different things: PAGE 266 of the manual: (http://www.securitycameraking......ELT-16.pdf) "5.8.3.2.2Net Alarm The network alarm...
View ArticleJose Malave on IP cam for TRIDVR-ELE16M
Both cameras would work with your Tribrid Recorder. You would need a PoE Switch or a 12VDC Power Supply. 4 Port POE Switch with 1 Gigabit Uplink Product# POE-4G1G 4 Channel Output Switching Supply...
View Articlecolinmi on There can be only one... DVR
Thank you for the phone and remote assistance with this. The SmartPSS software is a much better solution than trying to have multiple Web Service interfaces open. The users will appreciate it as...
View ArticleKz2wz9sl on IP cam for TRIDVR-ELE16M
Jose Malave said Both cameras would work with your Tribrid Recorder. You would need a PoE Switch or a 12VDC Power Supply. 4 Port POE Switch with 1 Gigabit Uplink Product# POE-4G1G 4 Channel Output...
View ArticleClik here to view.
marcin on "netalarm"
Just checking in to see if anybody has any idea how this can be done?
View ArticleRoger Davis on Wierd intermittant night operation
I have a very weird problem with one of my BNC wired cameras. This camera is in an 8 camera system. I have two transformers supplying camera power, and have switched power supply plugs several times,...
View ArticleKz2wz9sl on new to TRIDVR-ELE16M, checking these settings
i'm coming from a DigitalWatchdog VMax960h Core DVR with 8 Northern DTW212HIR960 cams. i'll be adding 2 IP cams soon, but that's another tech help time. need a some help with these sections for now:...
View ArticleTed on Wierd intermittant night operation
Hi Roger- The problem you are describing sounds very much like a power issue on that line. Is that a long cable run? If it is longer than 180 feet, you might be experiencing voltage drop on that line....
View ArticleDan Maresca on new to TRIDVR-ELE16M, checking these settings
hello, By default the cameras motion detection area is enabled by the red boxes. Clicking on them masks that area out. Depending on teh camera you have it would seem you want to choose 960H for...
View ArticleKz2wz9sl on new to TRIDVR-ELE16M, checking these settings
Dan Maresca said hello, By default the cameras motion detection area is enabled by the red boxes. Clicking on them masks that area out. Depending on teh camera you have it would seem you want to...
View ArticleRoger Davis on Wierd intermittant night operation
The cable run is 60 ft. The power comes from a transformer at the DVR end, so 60 ft for that too. I'm using one of the larger diameter cables, not the really skinny type. I can't easily swap out...
View ArticleDan Maresca on new to TRIDVR-ELE16M, checking these settings
Yes exactly I guess it is done that way so motion just works out of the box.
View ArticleTed on Wierd intermittant night operation
Roger - It looks like cable length is not an issue then. It could be interference though - are there any high power lines close to your cable run? (Or anything that would emit RF interference, like...
View ArticleRoger Davis on Wierd intermittant night operation
I understand. You mention about "high power" lines - there is a regular outdoor 110v wire running close to, but not next to (maybe 3" away), this cable run for maybe 15 or 20 ft. However, this has...
View ArticleMKRK on Auto reboot failure
I have the NVR-ELE8T-P NVR and it works just fine, installed it last week. This morning I was able to log in, but did not get any camera feed. Recording stopped at 2 am when the system did an auto...
View ArticleTed on Wierd intermittant night operation
Roger - The 110V line could well be causing interference if they are running parallel for that distance. A good rule of thumb for separation would be to keep them 8 ~ 12 inches apart at minimum if...
View ArticleTed on Auto reboot failure
MKRK - For a quick 'workaround' disable the maintenance reboot feature - this is in Main menu> System (Settings row) - locate 'Auto Maintain' on the left hand menu. Is this a new NVR, or is it an...
View ArticleRoger Davis on Wierd intermittant night operation
I understand about the 110 line, and will have to consider that. Maybe if the line is replaced I can run it along the house side instead of under the eaves. The toasted cable was a round cable, like...
View Article