Liz Osgood on Connect iPhone to dvr security cameras
I have a 4 camera security. The app I was given was nvms7000. My phone updated and I lot my view on my phone. My house camera work fine. I have called my carrier for a possible blocked port. Nah. I...
View ArticleJose Malave on Connect iPhone to dvr security cameras
Please contact us at 866 573-8878 option 3 for Tech Support. Please have your Order number and or an Email address associated with your account. We can assist you remotely and over the phone.
View Articleglock24 on Question about using dual NVRs
Hello from Michigan, I have only just begun my search, but I'm in the market for an IP camera/NVR setup for my stand-alone garage/workshop. And because I have no internet access, I plan to build a...
View ArticleEric Wilson on Question about using dual NVRs
Hello, What you are looking to achieve is very much possible and for you I would suggest our Elite line of NVR's and IP cameras and you can have the two NVR's recording simultaneously on a local...
View Articleatticus_grey on DX Series reader and strike lock wiring?
Hey guys, could someone confirm the wiring on a ACP-DXEL4? The strike lock has a built in signal. In total there is a reader, signal strike lock, and the controller. The manuals given seem to give 2-3...
View ArticleJose Malave on DX Series reader and strike lock wiring?
There are two different styles of Strikes. One is fail-safe and the other is fail-secure. Please provide me with the strike model so that I can assist you.
View ArticleClik here to view.
atticus_grey on DX Series reader and strike lock wiring?
Hey Jose, Thanks for getting back to me. In the meantime I've managed to figured out the right combo (not before blowing a few fuses hah). I've attached a messy picture for anyone to reference in the...
View ArticleJose Malave on DX Series reader and strike lock wiring?
Good to know that you got it to work. Relays are simple switches, while it can be a bit confusing its simple when you see the internal components. S1-4 is the signal that will tell the board when the...
View ArticleDmAnGus on NVR-SB16M-16P live view issue with lorex LNZ32P4 PTZ
Camera is detected fine, I can preview the video from edit camera option, as well as PTZ, Image and motion settings sections. However when i am in live display, i get no live feed video. Camera is...
View ArticleRyan on NVR-SB16M-16P live view issue with lorex LNZ32P4 PTZ
Hello and thank you for your post. Try to make sure that the cameras compression settings are no more than H.264. With ONVIF at the moment, H.265 is not going through, and all ONVIF or non-native...
View ArticleDmAnGus on NVR-SB16M-16P live view issue with lorex LNZ32P4 PTZ
Thanks for the response Ryan , I really appreciate it. I am assuming your response means I should log into the camera first, outside of the NVR, and configure the compression since its not configurable...
View ArticleDmAnGuS on NVR-SB16M-16P live view issue with lorex LNZ32P4 PTZ
Nope, no go. I changed the streams from H.264H, to H.264, to H.264B and still no video on the live view and still no ability to record. I have the camera hooked up via POE port, so it automatically...
View ArticleClik here to view.
DmAnGuS on NVR-SB16M-16P live view issue with lorex LNZ32P4 PTZ
So I removed the camera from POE, and configured on flat network. I now can access camera video directly from camera IP and from web client version of the NVR, but still not native video of NVR. I even...
View Articlemajorwoo on Sibell-NVMS won't auto start with Windows 10
I have a mini pc I want to stream one camera on 24/7. I have the NVMS software set to do this, and I've added it to the Windows startup folder, but when the PC reboots the software doesn't restart. I...
View ArticleJose Malave on Sibell-NVMS won't auto start with Windows 10
Are you adding a Link to the startup folder? I haven't yet had any issues with W10 running startup applications. press the Windows logo key + R, type shell:startup, then select OK You could add a...
View Articlemajorwoo on Sibell-NVMS won't auto start with Windows 10
Yes, I added it to the startup folder. I was going to go down the timeout path as I sort of figured that was what it was, but ended up using this script and running it through task scheduler every 10...
View ArticleJose Malave on Sibell-NVMS won't auto start with Windows 10
That is a better solution. Keep in mind that (goto:eof) will retain the error level, I would use (exit /b 0) to exit out of the script and bring back the error level back to default. tasklist|find /i...
View Articlemajorwoo on Sibell-NVMS won't auto start with Windows 10
Good point. Thanks. One should not code at 4am 🙂
View ArticleMark on Local monitor view question
I have an Elite series DVR and for whatever reason one of my cameras has disappeared from my local monitor. Only a red ? and the camera name are visible on a black background. I can still see the...
View ArticleBrian Lee on NVR-SB16M-16P live view issue with lorex LNZ32P4 PTZ
Could you go to System > Information in the NVR's main menu to see what firmware version you are on? We only need the first 3 digits of that version. Also on your local interface does the behavior...
View Article