mbkerk on WIreless camera config, IPOB-EL2IREW
I am running into a brick wall trying to configure this camera to work with a dlink wireless router... The plan is to have the router be a method to get a couple of wireless camera's to an adjacent...
View ArticleGeorge Lawshe on Skipped Recording
I had an incident and tried to provide recorded information I requested backup on one camera from16:12:00 until 16:16:00. I received two clips 16:12:00 til 16:12:36 and 16:15:13 til 16:16:29 The clips...
View ArticleAndyRPM360 on Sibell NVR showing 169.x.x.x for cameras
Setting up a Sibell 8ch, 8port poe NVR with 3 Sibell cameras. The NVR is obtaining ip address automatically but cameras are showing 169.x.x.x fall back address. All three cameras display video in...
View ArticleHeath Phillips on WIreless camera config, IPOB-EL2IREW
Good Morning, If we're talking about one of our Elite wireless cameras, there is nothing special that needs to be done in order to connect it to a D-Link router. Should be the same steps as any other...
View ArticleHeath Phillips on Skipped Recording
Hi George, Sounds to me as if you are probably recording motion, and those are the two clips the DVR/NVR recorder during the time frame you selected (16:12:00 until 16:16:00).
View ArticleHeath Phillips on Sibell NVR showing 169.x.x.x for cameras
Good Morning, Your NVR is not defective. This is normal operation for a Sibell NVR with built in POE, when pairing with Sibell IP cameras. The Sibell IPC's do not connect with the Sibell NVR's built...
View Articlembkerk on WIreless camera config, IPOB-EL2IREW
Good morning Heath... The camera UI shows the camera is there if it is on my home network and router, but will not connect to the link router I am trying to set up. In other words, in the connection...
View ArticleHeath Phillips on WIreless camera config, IPOB-EL2IREW
Are you able to connect anything else to this D-Link router wirelessly?
View Articlembkerk on WIreless camera config, IPOB-EL2IREW
I am connected to it right now with a laptop computer. I do not have the router on an internet connection. Only the camera hooked to one of the LAN ports. I am using another laptop on my home network...
View Articlembkerk on WIreless camera config, IPOB-EL2IREW
I should open a live chat window... or I could connect the windows computer I am using to my wireless network and plug the dlink router into the ethernet port and let you try to sort it out if time...
View ArticleHeath Phillips on WIreless camera config, IPOB-EL2IREW
You could also check under the TCP/IP settings of the camera.. make sure the wireless card is set for DHCP. Maybe it can not connect because it can not get an IP address?? Yes you're more than welcome...
View Articlembkerk on WIreless camera config, IPOB-EL2IREW
Just got called in to work Heath. Thanks for the help... I will work with it when I have more time later this week. If I don't figure it out I'll either call or open a chat window. You folks are always...
View ArticleHeath Phillips on WIreless camera config, IPOB-EL2IREW
OK sounds great. Hope to hear from you soon so we can get this resolved for you.
View Articlembkerk on WIreless camera config, IPOB-EL2IREW
I got the connection made before I left for work, but I am not sure how! I hate when that happens! A couple of answers would help. There are 2 connections... wired and wireless. One of them has to be...
View ArticleHeath Phillips on WIreless camera config, IPOB-EL2IREW
Yes there are 2 connections, wired & wireless. Whichever you decide to use for your application is the one that needs to be set as "default". I do believe they can be used at the same time, however...
View Articlembkerk on WIreless camera config, IPOB-EL2IREW
Heath Phillips said Connecting your NVR here will be the same as any other location, simply minus the Internet. Run a wire between the NVR's LAN port to one of the LAN ports on the router. The NVR...
View ArticleGeorge Lawshe on Skipped Recording
I know there was motion in between because in the last frame of the first clip there is a stopped vehicle, in the first frame of the last clip the vehicle is missing. So I know it had to move to leave.
View ArticleJose Malave on Skipped Recording
George, What Heath is explaining is, your recorder is set to record in Motion only, this means only motion recording shall be available. It is only available if an item/person triggers the Motion...
View ArticleHeath Phillips on WIreless camera config, IPOB-EL2IREW
That is correct. Depending on what NVR you're using it has either 1 or 2 LAN ports, always use #1 to go to the router. Plug it into the L:AN side of your router. LAN side of router is generally 4-5...
View Articlembkerk on WIreless camera config, IPOB-EL2IREW
Understood Heath... until the next time I set one up and it has been a few years since I did the last one 🙂 Thank you for the help!
View Article