Clik here to view.
Jer7of9 on FPS for different resolutions DVR brochure
One more thing, look at this DVR specs. It's the same DVR we were talking about in this thread. In this pic it says 1080p at 30fps all channels. But what you told me above 1080p is 1-25. It's the same...
View ArticleDan Maresca on AF dome lost PTZ control
Do you have a CCTV wrist monitor that does both formats?
View Articlebahamascctv on AF dome lost PTZ control
I have one thats just NTSC, but either way that wont help in this situation as we can't access the menu settings without an HD-CVI DVR/Controller.
View Articlebahamascctv on AF dome lost PTZ control
I have a regular (non CVI) DVR that does both PAL and NTSC, but all I would get is low res video and not be able to change the zoom or the settings. Thats my dilemma right now.
View ArticleRandyDuly on Possible power problem effecting video
First of all let me tell you right off I am a newbie. I am an IT Professional by trade and have recently been thrown into the security cameras, alarm and door access control systems. I have a client...
View Articlebahamascctv on AF dome lost PTZ control
Maybe you could ask the manufacturer how to get a CVI camera back to NTSC if it has been switched accidentally to PAL, since the PTZ control no longer works after the switch to PAL? I emailed them but...
View ArticleTed on Possible power problem effecting video
Hi Randy - First of all - the coaxial cable can be a factor. It needs to be copper center conductor and 95% copper shielding. (the braided part) Do not try to use coax that is used for cable TV - too...
View ArticleRobert on Ultimate Mini Series DVR Does Not Support Normally Closed Alarm...
I have model DVR-LT8240MHD. I wanted to connect my DVR to my home alarm system using the normally closed Alarm Output but it appears only Normally Open is supported? It appears the wire connection...
View ArticleRobert on Ultimate Mini Series DVR Does Not Support Normally Closed Alarm...
Correction, I didn't wire the terminals to ground; I meant to say: "I tried wiring to the NO and Ground terminals and also to the C and Ground terminals but these did not work."
View ArticleBobS0327 on URL streaming question
I have a Dahua 8 channel DVR and I'm trying to stream one of the channels to a web page using the following URL.. "http://XXX.XXX.XXX.XXX:9876/cgi-bin/mjpg/video.cgi?channel=2" But I get a...
View ArticleHeath Phillips on Ultimate Mini Series DVR Does Not Support Normally Closed...
The pin out is only going to show you NO, you can choose between NO or NC in the DVR's menu. Under the alarm settings you should find a drop down to choose between the two.
View Articlembkerk on Motion Detection Settings Questions TRIDVR-ELE8M
Just to update here... I ended up chatting with Heath in an online live chat and he eventually got through my thick skull and I got the desired results. Documentation is poor at best with these DVR's...
View ArticleRobert on Ultimate Mini Series DVR Does Not Support Normally Closed Alarm...
I wired Alarm Input and works ok; it has drop down menu for NO/NC but Alarm Output does not have NO/NC menu. I could only find Alarm Output menu that allowed Schedule/Manual/Stop. Main...
View Articlembkerk on Ultimate Mini Series DVR Does Not Support Normally Closed Alarm...
I looked too Robert (Just out of curiosity) and I understand your issue. I don't see a way to change alarm output either. You could however accomplish this using a relay if all else fails. Fairly simple.
View ArticleHeath Phillips on Motion Detection Settings Questions TRIDVR-ELE8M
Your welcome, get back with us if you end up needing anything else, thank you.
View ArticleRobert on Ultimate Mini Series DVR Does Not Support Normally Closed Alarm...
Simple but a relay needs to be powered. I am not engineer so probably safest to use separate power source, even though relay has small inductive load.
View ArticleJose Malave on URL streaming question
Hi, The password fields are based on a 64 bit encode. For example:admin/admin will be YWRtaW46YWRtaW4== . Encode Generator Here is the code for you to stream from the DVR: Use with admin/admin....
View ArticleClik here to view.
Jose Malave on Enabling the BNC Out on NVR-ELE16 and newer recorders.
With this NVR-ELE16 and many other recorders the BNC OUT comes disabed for security purposes if you wish to use the BNC OUT you will need to navigate to Menu>System>Display The recorder will...
View ArticleRon on Device manager settings for Techpross HD
Device information settings are: Register Mode: Quick DDNS Name: name registered with Techproddns Address: "name registered with DDNS".techproddns.com also tried "name registered with...
View ArticleRon on Device manager settings for Techpross HD
Solved the problem...for future searchers: Settings should be: Device information settings are: Register Mode: IP/Domain Name: any name...this will be the name that's shown on your android device for...
View Article