I am trying to get an older Tribrid ELE8M DVR to work with a new IPVD-ELES4IR28 IP camera.
The DVR allows channels 7 and 8 to be set as IP camera's. I have channel 8 set as IP. I did the IP search via the DVR camera page, found the camera and added it to the DVR.
Previously I had 2 wireless IP camera's set up on those channels and they worked as expected. (IPOB-EL2IREW)
When looking at an 8 camera view, the video from that camera will show up as one of the smaller videos showing across the bottom, however if I move it to the bigger frame it shows black.
It also shows black screen if I view 1 and choose channel 8 (assigned channel)... If I choose settings under motion detection (no video behind squares)... or on playback, even though there is motion detection events on the timeline of that channel AND the movement and camera indicators light on the regular monitoring screen so long as that camera is in a smaller area such as those in "View 8".
Am I throwing too much video resolution at that DVR, or any idea's what might be going on here?