Ted,
I have set up the resolution. The camera works great through the Lan port, the NVR finds it automatically. POE is still not working
I have tried the addresses as suggested no luck( but I did give up at 169.254.10.240). I also tried disconnecting the REOLINK camera you helped me with in case it was a device conflict. I set up a computer and connected to the POE port to see if I could access the camera directly. I am able to direct connect to the REOLINK camera this way but not to the IPVD-ELE3irz. I finally noticed that when I connect the camera to the POE port the Blue light on the front of the NVR illuminates for about 15 to 20 seconds and then stays dark. So now I'm thinking maybe a hardware issue with the camera??
Thanks
Stan Surratt