gbholzer said
Ok, this is my issue too. How can I get it to record on my TRIDVR-ELE8ME?
The TRIDVR-ELE8ME has the ability to accept two IP channels. You must enable these channels within the settings "Channel type". Once this has been done the recorder will reboot and you can add your cameras within the remote Section. Click on Manual add then Select the OnviF protocol when adding the TP Series cameras and input the correct username/password. You must access the TP camera via the IE browser to ensure that the Motion is enabled. If you have any questions feel free to give us a call at 866 573-8878 option 3. If using any third party cameras or Elite Cameras ensure that they are set to 720p or 1080P as these 2 channels can only handle these two resolutions.