Having trouble getting the subject camera to work with my NVR-ELE8M-P4K. Both purchased recently. At first I was able to get the camera to automatically add as a remote device, but after a week or so the NVR would recognize it, but status was always red (no picture); eventually I moved it to another port on the NVR and it seems to be OK in that respect.
My current issue is with the motion detect. When I try and set motion detect region, I get the error:
Channel 1 failed to get configuration
And on the 'Motion Detect' tab of the menu, there is no widget for setting sensitivity.
When I subsequently try to modify the motion detect area and say 'OK', I get:
Failed to save the configuration information
I tried doing a hard reset on the camera itself; restarting the NVR; and like I said, wound up moving the camera to another port.
I don't know if it's relevant, but when I select 'Modify' the camera in the added device list, and then try to connect to the camera (admin/admin), nothing happens.