Last night I was looking at my cameras. All was fine. I left the house and pulled them up on my Android phone using XMEye, siad my system was offline. Wasn't too concerned. When I got back home, turned on my tv being used as a monitor. All looked fine. I decided to reboot to see if the on line program would now work. Started the reboot just fine, then screen went dark and has not been on since. Got a No Signal message.
The system is set up as, 8 ch DRV, running 4 cameras (wired), Cat5 connected to Router, HDMI to 24" TV. Has been working fine for 2 months.
Now it does not seem to be sending to router either, the lights on the plug in are not flashing. I have tried Different HDMI Cable, I also removed the 1 TB hard drive, still no go. All the lights on the front of the DVR look just as they should.
I should also mention that this exact same thing happened on the previous DVR that was only 8 months old. They are not the same make. This newest one is only 2 months old. I feel like I am doing something to cause the failure. Anybody have an idea about this? Thanks in advance for your help!